Sinofloc Chemical

Drilling Fluid Additives - Drilling Mud Viscosifier

In the drilling operation, the anionic high polymer is often used as drilling fluid additives to increase the viscosity of the drilling fluid. It is divided into dry powders and emulsions. The emulsions are prepared into water-in-oil (W/O) by inverse emulsion polymerization. They have the characteristics of fast dissolution, easy dispersion, high solid contents and convenient field construction. 

As drilling fluid additives, it can be used in the drilling technology of different well locations; it can be used as secondary and tertiary oil recovery chemicals and can be used in various industrial wastewater treatment. The detailed description of the emulsion is as follows:


I. Performance characteristics

This product has the advantages of fast dissolving speed, easy dispersion, high solid contents and convenient on-site construction, etc.


II. Physical and chemical indexes


Solid content

Molecular weight

Degree of hydrolysis


White or yellowish emulsions


> 10 million


More than six months


III. Usage method

The emulsion product can be directly mixed into the mud, or directly added to the water to prepare certain concentration of aqueous solution.


IV. Precautions

1. This product has no obvious irritation to the skin, and rubber gloves should be worn when using it. Wash after contacting.

2. This product is non flammable, non explosive, non-toxic and harmless, and is managed and transported as non-dangerous goods;

3. It is packed in plastic drums with a net weight of 25 or 50 kg. Attention should be paid to moisture and leakage during storage. 

Drilling fluid additives are of great use in the practical operation. Beijing Sinofloc Chemical Co.,Ltd. provides you with the most appropriate drilling fluid additives, which can save your time and cost, and improve your work efficiency.

  • TEL:86-10-8595 8198
  • FAX:86-10-8595 8191
  • ADDRESS:2501 Jiasheng Center, No. A19, East 3rd Ring North Rd, Chaoyang, Beijing, China